Landing Page Details

WooCommerce Dynamic Pricing & Discounts is an all-purpose pricing and promotion tool for online retailers. Its power lies in its flexibility – loads of pricing methods and conditions can be combined to fit virtually any pricing strategy.

This actively maintained extension can easily replace multiple tools – use it for regular sales, promotions, special offers, bulk pricing, tiered pricing, bundle pricing, deals of the day, flash sales, wholesale pricing, member pricing, individual pricing, loyalty programs, behavioral pricing, location-based pricing etc. You can also conditionally increase prices or charge extra fees when needed.

Simple and straight forward to setup complex rules. Tried quite a few others but this one comes tops! – stumas
Fantastic plugin. I’ve tried other bulk discount style plugins, but this is the only one I’ve been able to configure exactly to my specifications. Worked flawlessly for me. Highly recommended! – ChaseMountains
Worked with other plugins and it costed me over half of a workday to get nothing done. Then I found this plugin, bought it, installed it and 2 min’s later I was good to go. AWESOME WORK! THANKS IN A MILLION! – antzproductions

Boost Your Sales
Sell more! Set up attractive discounts for customers who buy large quantities. Run special Christmas, Easter or Black Friday promotions. Set up clearance or flash sales. All laptops 15% off until midnight! Free case with each cell phone! Using this extension, you can set up the most powerful promotions in minutes!

Increase Customer Loyalty
Create long term pricing strategies to keep your best customers engaged. Reward customers that reach specific lifetime goals (money spent, orders completed). Use one store for both retail and wholesale sales. Start a club and offer insider discounts. Set up discounts for individual clients based on direct agreements.

WooCommerce Dynamic Pricing

Dynamic Pricing functionality adjusts the product price based on a set of rules that are managed from a single user interface. Target a specific variation, entire shop or anything in between. Dozens of conditions and priority options ensure that only the right rules are applied at any time.

✔ Simple Adjustment
Decreases, increases or sets the price to a fixed one not depending on quantity

✔ Bulk Pricing
Decreases the price with quantity – all units get highest “unlocked” discount

✔ Tiered Pricing
Decreases the price with quantity – subsequent units get increasing discount

✔ Groups of Products
Applies a discount when product(s) are purchased in specified quantities

✔ Buy X Get Y
Applies a discount to Y quantity when X quantity is purchased at a full price

✔ Exclude Matched Items
Excludes matching products from any other pricing rules

WooCommerce Cart Discounts

Cart Discounts work just like regular WooCommerce coupons except that there are no coupons to be applied. This ensures that eligible customers see their savings instantly without the need to take any action which can positively affect your conversion rates.

Configure cart discounts based on the cart subtotal, cart items, customer details, shipping address, past purchases and other conditions – in ways not imaginable when using regular coupons.

WooCommerce Checkout Fees

Checkout Fees provide a way to charge a customer extra based on the details of their order. Use it to cover costs that your business may incur while processing specific orders, e.g. charge for international order processing or perishable product handling.

This feature completes the package – instead of using multiple tools to cater for a variety of tasks, you can now use an all-in-one extension for anything that has to do with how much your customers pay.

Extensive Conditional Logic

Target Products
› Product
› Product variation
› Product category
› Product attributes
› Product tags
› Product meta field
 

    

Cart Properties
› Cart subtotal
› Cart total weight
› Coupons applied
› Cart item count
› Sum of item quantities
 
 

    

Items In Cart
› Products in cart
› Product variations in cart
› Product categories in cart
› Product attributes in cart
› Product tags in cart
 
 

Customer Properties
› Is logged in
› Customer role
› Customer capability
› Specific customer
› Customer meta field
 

    

Customer Value
› Amount spent
› Order count
› Last order amount
› Last order date
 
 

    

Purchase History
› Products purchased
› Product variations purchased
› Product categories purchased
› Product attributes purchased
› Product tags purchased
 

Shipping Address
› Shipping country
› Shipping state
› Shipping postcode
› Shipping zone

    

Date & Time
› Date
› Time
› Days of week
 

     The best part?
You can combine them
in any way you like!

 
 

So how do you set a discount valid through this year for all albums except Album #1 and Album #4 and make it available to non-wholesale customers who have purchased at least one single in the past 3 months? Here’s how…

Virtually Unlimited Scenarios

We know your head is probably spinning with perfect ideas, but here’s a few examples of what this plugin can do for you just in case you need a hint:

  • Buy at least 10 units get 5% discount
  • Any 3 t-shirts for $9.99 except t-shirts with custom artwork
  • Buy between 2 and 5 units get 10% discount, buy at least 6 get 20% discount
  • With each desktop computer get wireless keyboard with 50% discount
  • 5% lifetime discount after your 10th order, 10% after 50th
  • Extra handling fee of $15 if heavy items are in cart
  • Spend at least $1000 get 15% discount on your order
  • Stay free for 1 night when booking a hotel for 7 nights
  • SPA treatments 20% off when staying 3 nights or more
  • 10% discount for the first order only if other promotions do not apply
  • iPhone case with each iPhone purchased
  • Get $5 cart discount if you purchase anything from category Clothing
  • Everything for $9 until midnight but only if you purchase at least 3 items
  • Each fifth accessory is 30% off
  • This month all music albums 10% off, singles 25% off
  • Processing fee of $10 for international orders
  • 15% discount for repeat orders
  • Users with role Shop manager get 100% discount for testing purposes
  • 5% discount if no other discount is applied
  • Automated rewards program with tiered discounts for loyal customers
  • VIP club members get 25% cart discount on all items
  • Give 10% discount on laptops but only if customer is not VIP club member
  • And almost any other pricing, discount or fee scenario that you can imagine!
Unreal custom options, dev has really thought of everything! – holly114
I like how I am able to exclude certain role based customers. Ex: Wholesalers should not get an additional 10% discount when they are already getting a 50% discount. Thank you! – cctaber
This plugin is awesome! It adds a huge amount of flexibility to pricing and does so in an incredibly logical fashion. I can’t stress how easy it is to create pricing rules. I’m looking forward to future updates and was impressed by the quick support that was provided when I had a question. If you run Woo buy this plugin! – mattcrane

Frequently Asked Questions

Does this extension support product variations?
Yes, you can either select parent product to apply one discount for all variations or pick individual variations to set different discounts or include/exclude specific variations from a more general rule. You can also select products to discount by their attributes, tags or even custom field values.

Can I set different discounts for different categories at the same time?
Yes, you can create multiple product pricing rules and configure different discounts for different categories. In addition, you can pick individual products that you may wish to exclude from the category rule.

Can I offer discounts to subscribers/members of my site only?
Yes, you can use this extension to run promotions dedicated to subscribers or members of your site. The only requirement for your subscription/membership system is to use custom role, capability or user meta entry to tell members from non-members. For example, if you have a membership extension which changes user role to “member” when someone purchases a membership, you can use a role condition with value “member” to make sure that only members are eligible.

How will my customers know about the sale, special offer etc?
When developing this extension, our initial focus was on actually making all the different pricing adjustments, discounts and fees work. You can make almost any pricing strategy work but usually your customers are going to see their savings after adding some product to cart or going through the checkout. After getting the actual logic work well, we shifted our attention to the tools that help your customers learn about your deals and sales – you can opt to display a quantity pricing table for bulk and tiered pricing rules or make product prices throughout the shop reflect simple pricing rules. More promotional tools are planned for future releases.

Does it support … scenario?
9 out of 10 times (maybe even 99 out of 100) when we get this question the answer is yes. This has to do with how this extension is organized – it is not limited to a few settings that do very specific things, instead it offers multiple pricing/discount/fee methods with dozens of conditions and useful settings which can all be mixed and combined to come up with virtually any product pricing rule, cart discount or checkout fee. If you want to be sure that your desired scenario is supported, simply check out examples on this page, search the comments section, our knowledge base or just ask us. But have no doubt that such simple pricing rules as “buy 2 get 1 half price”, “buy 10+ with 15% discount” or “3 for $9.99” are supported.

Is it compatible with … extension?
More often than not this extension is compatible with other WooCommerce extensions as it uses standard price hooks to change prices and standard methods to add discounts/fees. There may be some edge cases where compatibility is not achieved out of the box – in these cases we either come up with a solution within a reasonable time frame or provide clients with a full refund.

Does it support WPML?
WPML compatibility is still on our to-do list as of now.

Does it support decimal quantities?
Decimal quantities are not supported and will not be supported in the future. This is due to some technical solutions in the plugin that do not work well with decimal quantities. These solutions enable some great functionality which would not be possible otherwise.

Does it support multiple currencies?
It depends on your specific needs. This extension is fully compatible with a few popular currency switcher plugins and will work fine out of the box. On the other hand, you won’t be able to set specific discounts for different currencies – you can only set them in base currency and get it converted automatically.

I installed this extension but run into a problem – what shall I do?
Head straight to our support site! We have some self-help content that you can consult and will respond to your inquiry within 24 hours (business days only) if you opt to send us one. Although this extension was developed to the highest standards and is constantly tested by thousands of users, there may be some edge cases, unique requirements or exotic server setups that have not surfaced to this date – we always keep an eye for them and value any feedback from our clients.

This plugin is super easy to use, works like it’s advertised, the purchase price is fantastic and the support I’ve received from the developer is second to none. I can’t recommend this plugin enough. – Ndev777
RightPress offers not only a great product, but some of the best customer support on CodeCanyon. Keep up the great work! – AntonNovikov
This is a fantastic and flexible plugin I’ve recommended for several clients. The customer service is high quality and fast to boot – highly recommend, thanks guys! – dnfs2000

Changelog

Version 2.2.8, 29 August 2018
------------------------------------------------------------------------------------
* Fix - "Buy x get y" rule applied twice under some conditions
* Fix - "Fixed discount per item" incorrect calculation under some conditions
* Fix - Price caching issue for variable products
* Fix - Parse error unexpected '{' in PHP 5.3

Version 2.2.7, 1 August 2018
------------------------------------------------------------------------------------
* Fix - Tiered pricing price per range wrong when multiple items fall into one range
* Fix - Tiered pricing price per range subtotal rounding issue
* Fix - Problems with cart discount limits when fixed cart discount is used
* Fix - Per item cart discount apportioned to items not matching conditions
* Fix - Simple pricing rules appear as being applied twice on add to cart
* Fix - "Cannot read property xxx of undefined" when Object.prototype is modified
* Fix - Double currency conversion with realmag777 currency switcher plugin
* Fix - Issue with multiple modal based volume pricing tables on a single page
* Fix - WooCommerce internal customer and product meta does not work in conditions
* Fix - Uncaught Error: Call to a member function get_cart() on null
* Tweak - Changed the way "Your Price" determines what price to display
* Tweak - Pricing table is now scrollable when there's not enough width for full table
* Tweak - Other minor bug fixes and improvements
* Dev - Changed RP_WCDPD_Controller_Methods_Product_Pricing::get_change_set() behavior
* Dev - Changed "Your Price" label element class to .rightpress_live_product_price_label
* Dev - New action rp_wcdpd_volume_pricing_table_before_table
* Dev - New action rp_wcdpd_volume_pricing_table_after_table
* Dev - New action rp_wcdpd_promotion_countdown_timer_before_timer
* Dev - New action rp_wcdpd_promotion_countdown_timer_after_timer
* Dev - New action rp_wcdpd_promotion_countdown_timer_before_label
* Dev - New action rp_wcdpd_promotion_countdown_timer_after_label
* Dev - New action rp_wcdpd_promotion_countdown_timer_after_time
* Dev - New filter rp_wcdpd_volume_pricing_table_title
* Dev - New filter rp_wcdpd_volume_pricing_table_display
* Dev - New filter rp_wcdpd_volume_pricing_table_applicable_rule
* Dev - New filter rp_wcdpd_volume_pricing_table_variation_attributes
* Dev - New filter rp_wcdpd_promotion_countdown_timer_display
* Dev - New filter rp_wcdpd_promotion_countdown_timer_display_for_product
* Dev - New filter rp_wcdpd_promotion_countdown_timer_applicable_rules
* Dev - New filter rp_wcdpd_promotion_countdown_timer_threshold_datetime
* Dev - New filter rp_wcdpd_promotion_countdown_timer_data
* Dev - New filter rp_wcdpd_promotion_rule_notifications_title_{context}
* Dev - New filter rp_wcdpd_promotion_rule_notifications_description_{context}
* Dev - New filter rp_wcdpd_promotion_rule_notifications_descriptions_to_combine_{context}
* Dev - New filter rp_wcdpd_promotion_rule_notifications_combined_description_{context}
* Dev - New filter rp_wcdpd_promotion_total_saved_discount_threshold

Version 2.2.6, 13 July 2018
------------------------------------------------------------------------------------
* Warning - Lowest supported WooCommerce version is now 3.0
* Fix - Incorrect cart discount amount in some cases since WooCommerce 3.2
* Fix - Performance issues related to extremely high quantities in cart
* Fix - More than one group formed for non-repeating group pricing in some cases
* Fix - Users with role shop_manager can't save settings in Promotion tab
* Fix - Issues with "Combine to one total discount" functionality
* Fix - Cart Discount description displays raw HTML in responsive themes
* Fix - Issue with BXGY rules when no products are added to the "Buy" section
* Fix - "You Saved" label disappears on responsive themes on mobile devices
* Fix - Clicking on volume pricing table does not change variable product image
* Tweak - Volume pricing table can now display discount amount and discount percentage
* Tweak - Improved handling of irrational prices in case of per-group pricing
* Tweak - Removed setting "Irrational price handling" after implementing auto detection
* Tweak - Tiered pricing lower tiers should apply to items with higher prices
* Tweak - Improved handling of incomplete cart item data due to 3rd party code
* Tweak - Other minor bug fixes and improvements
* Dev - Renamed all helper classes, check for new method location if used in custom code
* Dev - New filter rp_wcdpd_volume_pricing_table_range_value
* Dev - New filter rp_wcdpd_volume_pricing_table_range_discount_amount
* Dev - New filter rp_wcdpd_volume_pricing_table_range_discount_percentage
* Dev - Filter rp_wcdpd_product_pricing_adjusted_price second argument changed
* Dev - Filter rp_wcdpd_product_pricing_adjusted_unit_price arguments changed

Version 2.2.5, 15 February 2018
------------------------------------------------------------------------------------
* Fix - Cart Discount issue related to outdated virtual coupon default values
* Fix - Unable to determine time zone from time offset on some servers
* Tweak - Other minor bug fixes and improvements

Version 2.2.4, 14 December 2017
------------------------------------------------------------------------------------
* Fix - Fatal syntax error on specific PHP versions
* Fix - Warning "Parameter must be an array or an object that implements Countable" 
* Fix - Product sale price display issue under specific circumstances
* Fix - Subtotal in mini-cart is not recalculated in recent WooCommerce versions
* Fix - Incorrect bigger/smaller discount/fee selection under specific circumstances
* Tweak - Percentage discounts are now applied as virtual percentage coupons
* Tweak - Cart discounts will now apply sequentially if set so in WooCommerce settings

Version 2.2.3, 20 November 2017
------------------------------------------------------------------------------------
* Fix - Wrong cart item price displayed when some units are based on regular price
* Fix - WC customer/product properties set as meta conditions result in error
* Fix - Volume pricing table not displayed in product quick view
* Fix - Undefined index QUERY_STRING on some servers
* Fix - Currency switcher compatibility issues
* Fix - Compatibility issues with WooCommerce versions < 3.0
* Fix - Public description tooltips not visible on some themes (z-index issue)
* Fix - Custom taxonomy condition displays warning when get_the_terms returns false
* Fix - Quotes in condition item names not handled properly
* Tweak - Other minor bug fixes and improvements

Version 2.2.2, 12 October 2017
------------------------------------------------------------------------------------
* Fix - Wrong subtotal displayed in mini-cart
* Fix - Pricing table should not be displayed on load when targeting specific variations
* Tweak - Added "All quantities added up" option to "Quantities Based On" for group rules
* Tweak - Other minor bug fixes and improvements
* Dev - Changes to HTML layout and CSS classes in "Your Price" functionality
* Dev - Removed filter rightpress_live_product_price_update_html
* Dev - Added filter rightpress_live_product_price_update_price_html
* Dev - Added filter rightpress_live_product_price_update_label_html

Version 2.2.1, 2 October 2017
------------------------------------------------------------------------------------
* Fix - Non-product condition issues with group pricing rules
* Fix - Product attribute condition issue with "any" variation attribute
* Fix - Tax display issues related to "Your Price" functionality
* Fix - Tax display issues when cart item price composition is displayed
* Fix - Auto add to cart does not take actual purchase/receive quantities from settings
* Fix - Group pricing problems with parent/child categories used for different group products
* Fix - Double discount in quantity pricing table under some conditions
* Fix - Warning "Invalid argument supplied for foreach" 
* Tweak - Other minor bug fixes and improvements

Version 2.2, 27 September 2017
------------------------------------------------------------------------------------
* Feature - Price breakdown is displayed in cart instead of average price
* Feature - Public rule descriptions to provide more information to customers
* Feature - Promotion tool "Your Price" - displays discounted price on product page
* Feature - Promotion tool "Total Saved" - displays total amount saved by customer
* Feature - Promotion tool "Customer Notifications" - lets customers know about discounts
* Feature - Promotion tool "Countdown Timer" - displays timer for time limited rules
* Feature - Option to limit max discount per product, max cart discount and max checkout fee
* Feature - Free product in "Buy X Get Y" rules can now be added to cart automatically
* Feature - New product condition: Product price
* Feature - New product condition: Product is on sale
* Feature - New condition: Shipping method
* Feature - New condition: Any pricing rule applied
* Feature - New set of conditions: Quantity of specific product purchased in the past
* Feature - New set of conditions: Value of specific product purchased in the past
* Feature - Support for custom taxonomy conditions (e.g. brands)
* Feature - "Buy x get x" rule separated from "Buy x get y" for more clarity
* Feature - Option to include all rule types when changing prices throughout the shop
* Feature - Option to define whether amounts in conditions include tax
* Feature - Option to suppress regular coupons if at least one cart discount is applicable
* Feature - Settings import and export functionality
* Fix - Problems with currency switcher extensions
* Fix - Coupon condition lag for pricing rules with Flatsome
* Fix - "Group of products" does not honour "Quantities based on" setting
* Fix - Compatibility issues with WooCommerce Product Bundles
* Fix - Added jquery dependency for checkout.js
* Tweak - Basic rule details are now displayed in rule header
* Tweak - Pricing table: clicking on quantity updates quantity input
* Tweak - Pricing table: clicking on variation name selects appropriate variation
* Tweak - Pricing table: clicking on price selects variation and updates quantity input
* Tweak - Pricing table now considers volume rules with cart conditions
* Tweak - More cart related conditions made available under product pricing
* Tweak - Display price caching improvements
* Tweak - Catalog display prices now includes rules with cart discounts by default
* Tweak - Changed the appearance of condition type selector for use of use
* Tweak - Changed lowest supported WooCommerce version to 2.4
* Tweak - Improved compatibility with WooCommerce 3.2
* Tweak - Other minor bug fixes and improvements
* Dev - Added filter rp_wcdpd_all_capabilities
* Dev - Added filter rp_wcdpd_current_user_capabilities
* Dev - Added filter rightpress_live_product_price_update_html
* Dev - Added action rp_wcdpd_product_pricing_rule_applied_to_cart
* Dev - Added action rp_wcdpd_cart_discounts_rule_applied_to_cart
* Dev - Added action rp_wcdpd_checkout_fees_rule_applied_to_cart
* Dev - Added function rp_wcdpd_display_countdown_timer($product_id)
* Dev - Added function rp_wcdpd_display_volume_pricing_table($product_id)
* Dev - Table templates moved to extensions/promotion-volume-pricing-table/templates

Version 2.1.1, 24 August 2017
------------------------------------------------------------------------------------
* Fix - Fatal error on coupons page when coupons condition is used
* Fix - Cart subtotal condition does not work properly after 2.1 release
* Fix - Product stock condition does not check variation stock setting
* Fix - Numeric comparison in conditions susceptible to float precision problems

Version 2.1, 8 August 2017
------------------------------------------------------------------------------------
* Feature - Options to set per-item cart discounts and checkout fees
* Feature - Product conditions are now available for cart discounts and checkout fees
* Feature - Option to have a desired subtotal when adjusted price is irrational
* Feature - Option to hide regular price when discounting products
* Feature - Option to display a single pricing table for all variations
* Feature - Option to disable a rule without setting a condition
* Feature - New pricing method for tiered discounts: Fixed price per range
* Feature - New condition: Payment method
* Feature - New condition: Date/time
* Feature - New condition: Average order amount
* Feature - New condition: Customer product review count
* Feature - New condition: Product stock quantity
* Feature - New set of conditions: Cart item quantities
* Feature - New set of conditions: Cart item subtotals
* Fix - Percentage cart discount takes wrong subtotal
* Fix - Pricing table displayed when product price is empty (product not purchasable)
* Fix - Pricing table does not honor "Use regular price" setting
* Fix - Pricing table is not displayed on page load when default variation is set
* Fix - Problems when products/categories/etc that appear in conditions are deleted
* Fix - Product pricing regular price tax lag when changing address in cart
* Fix - "Use regular price" setting affects item at full price
* Fix - Incorrect prices when RealMag777 currency switcher extension is enabled
* Fix - Flatsome quickview displays tables for all variations
* Fix - No striked-through regular price when WooCommerce Multilingual plugin is active
* Fix - Shipping condition lag in cart
* Tweak - Improved user interface for "Buy x get y" type of rules
* Tweak - Separated product conditions from other conditions for better usability
* Tweak - Improved  price calculation algorithm when multiple rules are applicable
* Tweak - Improved user interface performance to load quicker with large set of rules
* Tweak - Correct cart discount titles are now displayed in admin order view
* Tweak - Cart discount link in admin order view now leads to correct settings page
* Tweak - Do not add cart discount or checkout fee if amount is zero
* Tweak - Other minor bug fixes and improvements
* Dev - Removed filter rp_wcdpd_product_pricing_adjusted_amount
* Dev - Removed filter rp_wcdpd_datepicker_config
* Dev - Added filter rp_wcdpd_product_pricing_adjusted_unit_price
* Dev - Added filter rp_wcdpd_product_pricing_adjusted_price
* Dev - Added filter rp_wcdpd_datetimepicker_date_config
* Dev - Added filter rp_wcdpd_datetimepicker_time_config
* Dev - Added filter rp_wcdpd_datetimepicker_datetime_config

Version 2.0, 30 May 2017
------------------------------------------------------------------------------------
* Feature - Plugin core rewritten to make it more flexible and maintainable
* Feature - User interface redesigned to make it cleaned and easier to use
* Feature - Checkout fees to allow charging user extra during checkout
* Feature - New pricing methods: simple, tiered pricing, group of products
* Feature - New conditional logic system offers 37 powerful conditions
* Feature - Prices throughout the shop can now be changed based on simple pricing rules
* Feature - Simple pricing rules now support positive pricing adjustments (fees)
* Feature - Option to duplicate rules
* Fix - Quantity pricing table tax issues
* Fix - Quantity pricing table displayed only once in product list view
* Fix - Users with role "shop_manager" can't save plugin settings
* Tweak - Option to exclude products that are set on sale in product settings
* Tweak - Option to use regular price for pricing adjustments instead of final price
* Tweak - Option to hide implicit quantity ranges in quantity pricing table
* Tweak - Option to show cart discounts and checkout fees individually or combined
* Tweak - Several currency changing extensions are now supported
* Tweak - Customer value conditions now checks for orders by billing email too
* Tweak - Removed support for "Products to adjust" for quantity discounts
* Tweak - Other minor bug fixes and improvements
* Dev - System to add custom conditions, pricing methods etc programmatically
* Dev - New filters for flexible control of pricing adjustments, discounts and fees

Version 1.1.2, 10 April 2017
------------------------------------------------------------------------------------
* Fix - Conditions not working properly for variable products since 1.1.1

Version 1.1.1, 5 April 2017
------------------------------------------------------------------------------------
* Tweak - Improved compatibility with WooCommerce 3.0

Version 1.1, 11 April 2016
------------------------------------------------------------------------------------
* Feature - Added support for automatic updates
* Fix - Admin UI styling issue
* Tweak - Improved compatibility with Wordpress 4.5

Version 1.0.18, 8 April 2015
------------------------------------------------------------------------------------
* Fix - Cart discount is not displayed on product quantity change
* Fix - Warning "coupon invalid" is produced when the last item is removed from cart
* Tweak - Removed option to apply discount after tax (compatibility with WooCommerce)

Version 1.0.17, 9 March 2015
------------------------------------------------------------------------------------
* Fix - Discount is not displayed on first cart load

Version 1.0.16, 25 February 2015
------------------------------------------------------------------------------------
* Fix - Price is displayed striked through when no discount is applied

Version 1.0.15, 19 February 2015
------------------------------------------------------------------------------------
* Fix - Compatibility issues with WooCommerce 2.3

Version 1.0.14, 4 February 2015
------------------------------------------------------------------------------------
* Fix - Wrong subtotal in widget mini cart
* Tweak - Improved compatibility with WooCommerce 2.0 (function remove_coupon())

Version 1.0.13, 30 October 2014
------------------------------------------------------------------------------------
* Fix - Pricing table display conditions check issues

Version 1.0.12, 24 October 2014
------------------------------------------------------------------------------------
* Fix - Problem with maximum_amount property of WooCommerce coupon
* Fix - Array to string conversion notice
* Fix - Problems displaying subtotal and total in mini cart
* Tweak - Pricing table now displays trailing zeros by default

Version 1.0.11, 24 September 2014
------------------------------------------------------------------------------------
* Fix - Changed language file template name from default.pot to rp_wcdpd.pot
* Tweak - Removed hardcoded rounding to two decimals in favor of WooCommerce setting
* Tweak - "Products in list" will now include products with various statuses

Version 1.0.10, 10 September 2014
------------------------------------------------------------------------------------
* Fix - Notice "Undefined index: display_offers" 
* Dev - Allowing other plugins to extend list of capabilities to use in conditions

Version 1.0.9, 9 September 2014
------------------------------------------------------------------------------------
* Fix - Improved compatibility with PHP 5.2 (PHP_ROUND_HALF_DOWN issue)
* Fix - Changed $discounts_applied property from private to public

Version 1.0.8, 20 August 2014
------------------------------------------------------------------------------------
* Fix - Cart discount coupon produces error when WooCommerce coupons are disabled
* Fix - Strict Standards warnings
* Tweak - Allowing discounts to be applied by manually calling apply_discounts()

Version 1.0.7, 13 August 2014
------------------------------------------------------------------------------------
* Tweak - "Coupon Is Not Valid" error on cart quantity change is now suppressed
* Tweak - Other minor bug fixes and improvements

Version 1.0.6, 6 August 2014
------------------------------------------------------------------------------------
* Fix - Discount rounding issues

Version 1.0.5, 14 July 2014
------------------------------------------------------------------------------------
* Fix - Infinite loop issue when "ghost" categories are present
* Fix - Variable product price adjustment bug

Version 1.0.4, 26 June 2014
------------------------------------------------------------------------------------
* Fix - Pricing table is not displayed on last variation
* Tweak - Improvements to rule selection for pricing table

Version 1.0.3, 16 April 2014
------------------------------------------------------------------------------------
* Tweak - Improved plugin performance

Version 1.0.2, 27 March 2014
------------------------------------------------------------------------------------
* Feature - Added user capabilities to conditions list (support for Groups plugin)
* Fix - Pricing table display issues when using ranges of one unit
* Tweak - Pricing table is displayed instantly, if all variations have the same price
* Tweak - Improved algorithms related to quantity calculation

Version 1.0.1, 12 March 2014
------------------------------------------------------------------------------------
* Fix - Several minor issues

Version 1.0, 10 March 2014
------------------------------------------------------------------------------------
* Initial release

  • bliss_delavie

    2017-10-04 03:44:51
    Purchased Reply

    Hi, I'm a customer of yours. I really like the upgrade to your dynamic pricing plugin, but I've seem to come across a bug. My clients is a food retailer that has at the moment is just using simple. They want to start offering and variable products of different sizes. However, they also have an offer on selected lines of "buy any 3 for £5 (when the base price is £2 for all included lines). It's important that the 3 for £5 offers is cabable of including any simple products and any product variations. Your "Buy X for X (repeated)" should be able to handle the 3 for £5 pound offer, as Buy 2 get £1 off the 3rd... repeated for the total of qualifying products and applied to whatever products and product variations. However on testing this on both my site and your demo site I appear to find a bug, as follows. On your demo site I started by adding two simple products, both $2 (something sweet, and something savoury) and then adding a variable product (something munchy) with two variations: small priced $2 and large priced $5. I setup the Buy X for X offer in your plugin with just the two simple products first, as shown. I then went to the live site and ordered 4 and 2 respectively and went to the cart. The discount was applied as I expected. Then I went back to the plugin settings and added the small variation of the variable product to the same discount. When I went back directly to the cart without changing anything the discount had dissapeared. (I hadn't even added the variation). Please could fix this bug as I would really like to move the client over to using variable products. I would have preferred to give you this bug report via your proper support form. However as my support license has expired that was not possible. This, I think, is really bad practice as it stops you recieving things like bug reports and useful requests for functionality. Can I suggest that you have a section specially for such queries. Also, I really think this plugin should be included on the wordpress plugin site, so people can find it and also it can be updated automatically... I didn't reallise that you had released a new version and was about to dump you for a competitor!!!.. Which would have been sad. :cry

  • RightPress_Support

    2017-10-04 23:45:51
    Purchased Reply

    Hi! Please note that you have 2 conditions at the same time on your second rule setup screenshot - in that case, they should be BOTH matched (there's no OR logic for those conditions, only AND). So to apply the same discount for different variations, just clone this rule and list the variations under one condition. As for the automatic updates - it is our own commercial service, which is only available for users with active support license, so that's why you, unfortunately, haven't got any notification. Kirill

  • 1-StopDesign

    2017-10-12 07:19:33
    Purchased Reply

    I love this plugin and have been using it for quite some time but have been encountering a pretty major issue since WooCommerce's 3.2.0 update today. Ever since I updated to the latest version of WooCommerce the cart subtotal in the mini-cart/WC cart widget always shows as $0.00 no matter how much there is in my cart. THe only reason I know this is caused by the plugin is because deactivating the plugin is the only thing that fixes the issue.

  • RightPress_Support

    2017-10-12 18:58:40
    Purchased Reply

    Hi! I see that you submitted a ticket about this - let's continue discussing it there. Kirill

  • DaWpGuy

    2017-10-13 20:24:30
    Purchased Reply

    Hello is it possible to allow customer to enter weight value for a product and on the entered weight value cost will be calculate. like 1kg is $10 and if customer enters 1.5kg then cost will be $15. Please let me know if this could be possible Thanks

  • RightPress_Support

    2017-10-14 00:18:22
    Purchased Reply

    Hi! No, unfortunately not - the only weight-based condition available is the total weight of the Cart. Kirill

  • xmessa

    2017-10-24 11:17:43
    Purchased Reply

    I am trying to edit the settings > so I wish to export and edit the exported file > then import..However I cannot get this to work as it keep saying "Error: Uploaded configuration file is not valid." In this case I simply replace the pricing methods - is there any way we can edit the exported file then import it?

  • RightPress_Support

    2017-10-24 18:28:39
    Purchased Reply

    Hi! Well, it must be something that breaks the structure of the file. Feel free to submit a support ticket to us, so we could help you with this. Kirill

  • gamerempire

    2017-11-01 23:42:24
    Purchased Reply

    Is it possible to use this module to apply a discount to an item if a different item is purchase? So, for example, when you buy this TV you get this speaker system for 50% off or $50 off?

  • RightPress_Support

    2017-11-02 04:44:31
    Purchased Reply

    Hi! Yes, sure, that is possible to add such condition to any rule, but the most common use case is to set this as "Buy X Get Y" rule. Feel free to submit a support ticket to us if you need any help in setting this up. Kirill

  • gamerempire

    2017-11-03 22:37:31
    Purchased Reply

    Great, thank you.

  • Kirem

    2017-11-10 03:22:23
    Purchased Reply

    It doesn't works with last version of woocommerce, can check it please? My config here: http://prntscr.com/h8b9te

  • Kirem

    2017-11-10 03:38:22
    Purchased Reply

    Woocommerce 3.2.3 and Dynamic Pricing & Discounts Plugin 2.2.2

  • RightPress_Support

    2017-11-10 18:49:59
    Purchased Reply

    Hi! What exactly doesn't work? Please submit a support ticket to us with temporary login credentials, so we could look into your setup. Kirill

  • Kirem

    2017-11-10 19:28:24
    Purchased Reply

    I doesnt works buy X get X

  • RightPress_Support

    2017-11-10 21:04:23
    Purchased Reply

    Ok, let's discuss this in ticket - will need to check your setup. Kirill

  • aphiwatng

    2017-11-12 16:52:03
    Purchased Reply

    Hi, I just updated to version 2.2.2 I found some error on summary price at cart page. please see this picture. in picture 15.67x6=94.02 but it show 94.03 https://www.mx7.com/view2/AeHZmrypdDYK2GiT how to fix this problem? thank you

  • aphiwatng

    2017-11-12 17:01:39
    Purchased Reply

    this problem will occur when I put the quantity 5 pcs up see picture here: https://www.mx7.com/view2/AeI42M8XsqhuKe8c Thank you

  • RightPress_Support

    2017-11-13 19:21:33
    Purchased Reply

    Hi! Please submit a support ticket to us with temporary login credentials, so we could look into your setup. Kirill

  • aphiwatng

    2017-11-13 20:04:10
    Purchased Reply

    Okay, already submitted please check. Thank you

  • mahmoudtaha1978

    2017-11-20 02:21:47
    Purchased Reply

    Please i use the latest version of WordPress, as well as woocommerce, and avada theme, if your plugin is suitable for them? thank you,,

  • RightPress_Support

    2017-11-20 17:11:59
    Purchased Reply

    Hi! Yes, our plugin supports all the latest WooCommerce and WordPress updates. As for Avada theme - we haven't tested this, so can't guarantee the compatibility, however, we haven't heard about any issues with this theme. Kirill

  • hype-media

    2017-11-22 21:30:33
    Purchased Reply

    In Promotion tab: "Volume Pricing Table Displays a table with potential savings that come with higher quantities purchased." Why does this only become visible on product page AFTER i place product in cart? I want to show it all the time.

  • RightPress_Support

    2017-11-23 00:09:17
    Purchased Reply

    Hi! It actually has to be displayed before adding to cart. Please submit a support ticket to us with temporary login credentials, so we could look into your setup. Kirill

  • hype-media

    2017-11-23 00:14:14
    Purchased Reply

    Thank you for fast answer. Will write on support ticket page.

  • ljezard

    2017-12-02 04:48:00
    Purchased Reply

    Pre-sales question Can this be done with your extension: Users get discounts based on their purchase history, and discounts automatically increase as purchase total increases. So, something like this: Total purchase history of $500, customer gets 5% discount on all future purchases Once same customer reaches $1000 total purchase history, discount is increased to 7.5% Once same customer reaches $1500 total purchase history, discount is increased to 10% Want this to be a hands-off system so admin doesn't have to manually monitor purchase history and manually set higher discount rates.

  • RightPress_Support

    2017-12-04 18:49:56
    Purchased Reply

    Hi! Sure, there are such conditions available, and you can setup such system with any amount of total-discount pairs. Feel free to submit a support ticket to us if you need any help in setting this up. Kirill

  • ljezard

    2017-12-05 05:40:28
    Purchased Reply

    Great - thanks!

  • ErikEvg

    2017-12-12 23:06:48
    Purchased Reply

    Hi, I would like to know how it would be and if the plugin supports this rule: Buy 2 products and 3 with 50%. Product 1: Femina shirt with its variations. Product 2: Men's shirt with its variations. Buy 2 and get 50% discount on the 3, it can be 2 male and 1 female or 2 feminine and 1 male. 1 - Men's green shirt size m. 2 - Women's blue shirt size xg 3 - Pink feminine shirt size xg Thank you

  • RightPress_Support

    2017-12-13 04:22:11
    Purchased Reply

    Hi! Yes, most probably that will be possible to setup such rule - please try to test this on our demo site with "Buy X Get Y" type of Product Pricing rule. Kirill

  • mikesneider

    2017-07-29 02:14:12
    Purchased Reply

    Hi, I want to change update my price and stock with a URL (some code with PHP that I can read a CSV file), Can I do this with this plugin?

  • RightPress

    2017-07-29 17:14:20
    Purchased Reply

    Hi there, No, this is out of scope for what this plugin does, unfortunately. Paul

  • HelloDetail

    2017-08-29 05:27:05
    Purchased Reply

    Hi! I want to offer a discount where: If any product variant (with an exception of a few specific variants) is in the cart; then the customer can select one of three options (preferably - the options should not have to be actual products in the shop). To be specific, I want the offering to be like this. If any par of shoes (with different sizes setup as variants) is added to the cart, then the customer can choose between a (1) free pair of shoe trees, (2) shoe polish OR (3) a pair of outsoles. These alternatives are not products sold separately in the shop today. Is this possible and if so how should I set it up (so that I can try in the demo)? Thanks, Joakim

  • RightPress_Support

    2017-08-29 19:09:04
    Purchased Reply

    Hi Joakim, It is not possible with this plugin, but our Custom Fields plugin supports adding such fields to the products or checkout. Kirill

  • HelloDetail

    2017-09-04 01:16:16
    Purchased Reply

    Thanks for the answer. A follow up question: Is it possible to implement a Buy X get Y free offer automatically? So if buyer adds product X to the cart, product Y is added automatically added to the cart with a price of 0?

  • RightPress_Support

    2017-09-04 17:03:29
    Purchased Reply

    Hi! No, unfortunately it's not yet possible in the current version, but we do have this feature planned for the future. Kirill

  • newsprince

    2017-09-20 04:15:50
    Purchased Reply

    Hello. I have a question. Does your plugin support the scenario for example, I have a product that costs 10$. When someone purchase 10 quantities from this product the next person who will purchase this product will pay 9$. After 10 quantities bought the next price will be 8$ and so on. Thank you.

  • newsprince

    2017-09-20 04:17:16
    Purchased Reply

    After X amount of quantities bought the price will drop 1$

  • RightPress_Support

    2017-09-20 16:10:55
    Purchased Reply

    Hi! No, unfortunately, such condition is not available in the current version yet. Kirill

  • myworkpool

    2017-12-26 15:45:15
    Purchased Reply

    Hello to you support need you help. I want to do promotions. 2 pieces of item purchase price 18 baht normal price 11 baht price exhibition so wrong. https://www.picz.in.th/image/0z2w8W

  • RightPress_Support

    2017-12-26 17:12:51
    Purchased Reply

    Hi! Please make sure you're using the latest 2.2.4 version. If it is already, or update doesn't help, please submit a support ticket to us with temporary login credentials, so we could look into your setup. Kirill

  • myworkpool

    2017-12-26 18:54:35
    Purchased Reply

    https://www.picz.in.th/image/0NzSG1 Yes, guys. I updated latest version of Plugin all is 2.2.4. Config https://www.picz.in.th/image/0NzxCP

  • RightPress_Support

    2017-12-26 19:53:39
    Purchased Reply

    Ok, let's continue discussing this in your ticket. Kirill

  • flyhead

    2017-12-29 20:12:13
    Purchased Reply

    When a "Simple Adjustment" is added, "Your Price" shows a discount value basing only on the base currency, but not the currency selected by the user. That means when a product is 10 USD and a 10% discount is applied, "Your Price" shows a value of 9 no matter what currency the user selected. The worst part is that the actual discount is not reflected in the cart at all. This render the plugin totally unusable.

  • RightPress_Support

    2017-12-29 22:53:02
    Purchased Reply

    Hi! Our plugin does support some currency switching plugins, but please note that it's not possible to support them all, so it depends on which one you're using on your store. I see that you submitted a ticket to us regarding this - let's continue discussing it there. Kirill

  • jasbirg

    2017-04-22 23:53:48
    Purchased Reply

    Hello, I want to use this plugin for discounts by Role. Does this plugin have option to create new Roles? As there is no option to create Roles in default setup.

  • RightPress_Support

    2017-04-24 18:54:52
    Purchased Reply

    Hi! No, roles can't be created from this plugin, but already created can be used to setup a condition. Kirill

  • JVJH44

    2017-04-25 11:24:29
    Purchased Reply

    Hello RightPress team, I have not yet solicited you for your help, but I have encountered a worry since the last update Woocommerce, the discounts no longer apply. Could you tell me how to solve this problem? Thanks you very much for your help ! Best regards, Hugo

  • RightPress_Support

    2017-04-25 15:47:09
    Purchased Reply

    Hi Hugo, First of all - make sure you have the latest version 1.1.2 and if you don't - download it here on CodeCanyon. If that doesn't help please submit a support ticket to us with temporary login credentials, so we could look into your setup. Kirill

  • schoenha

    2017-05-05 18:54:08
    Purchased Reply

    Good Morning, yesterday I updated from woo commerce 2.xx to woocommerce 3.0.5. Now the discount table is invisible and the product itself is not displayed completely. Only if I choose "Do not displayed" there is a chance to see the product page completely. I use Generate Press and Pricing and Discounts Version 1.1. What could be the problem? BR Matthias

  • schoenha

    2017-05-05 18:55:39
    Purchased Reply

    Before I tried all possible display options

  • schoenha

    2017-05-05 19:07:58
    Purchased Reply

    Problem is solved.... I download the newest version from codecanyon. Deleted the 'old' version 1.1 and installed the downloaded one (1.1.2). The old rules are already there ... great.

  • RightPress_Support

    2017-05-08 17:20:43
    Purchased Reply

    Hi! Glad that you were able to solve this - recent version is compatible with WooCommerce 3+ updates. Kirill

  • phangmoh

    2017-05-14 19:29:13
    Purchased Reply

    Has been a year since the last major release and yet still no support for bulk pricing for variable product.

  • RightPress_Support

    2017-05-15 17:45:32
    Purchased Reply

    Hi! Yes, we are sorry about lack of this feature, but we're currently working on even bigger update that will have a lot more of new features. Kirill

  • phangmoh

    2017-05-18 11:46:38
    Purchased Reply

    Is the variable product quantity pricing with table on product page included in this new update? Please be firm with your releases dateline, it's like a moving goal post.

  • RightPress_Support

    2017-05-18 17:15:39
    Purchased Reply

    Yes, those features are included. Please note that this is very complex release and in such cases it's common that estimates are moved. Our main goal is to provide best user experience, not release it sooner than it's fully ready and tested. Kirill

  • RightPress

    2017-07-06 01:04:33
    Purchased Reply

    Quick update. Version 2.0 was released on 30th of May and now fully supports product variations and attributes. Paul